- Hp dl360 g6 configure smart array how to#
- Hp dl360 g6 configure smart array install#
- Hp dl360 g6 configure smart array upgrade#
- Hp dl360 g6 configure smart array software#
Hp dl360 g6 configure smart array install#
Install the ssacli package from one of the sources above:
![hp dl360 g6 configure smart array hp dl360 g6 configure smart array](https://m.media-amazon.com/images/I/61cIVJHNNXL._AC_SL1500_.jpg)
![hp dl360 g6 configure smart array hp dl360 g6 configure smart array](https://m.media-amazon.com/images/I/51DFzPg9F1L._AC_SL1000_.jpg)
Option B: download the packages from the HP repositories.Mount the ISO and copy the appriate file for your system: hp/swpackages/ssacli-*.rpm (either i386 or x86_64)
![hp dl360 g6 configure smart array hp dl360 g6 configure smart array](https://i.ytimg.com/vi/Q6kWuNb9hsA/maxresdefault.jpg)
blogs about and shares the Service Packs from HP regularly alternatively search for the MD5 checksum given in the download descriptions of HPĮ.g.astonishingly this requires a running support contract with HP.
Hp dl360 g6 configure smart array upgrade#
upgrade the RAID controller firmware (3.x is not sufficient 6.6.8 works see the end of this page)Īcquire the ssacli package for configuring the RAID controller manually:ĭownload the HP Service Pack for your server.obviously you should rescue the data before, if you need itĮnter the setup via F8 during bootup as soon as you see the greeting message of the P420i controller.if the disks currently contain data, you will want to copy them beforeĬonfigure the controller for HBA mode (pass-through)ĭelete any existing configured array in the Smart RAID controller setup.you cannot use the RAID modes provided by the controller (this is quite obvious).The BIOS cannot boot from the disks attached to the RAID controller (see below Booting without the RAID controller) There are some downsides when configuring the controller for HBA mode (pass-through): It is also not possible to configure "RAID 0" for all disks separately, since these disks still contain the meta data format of the RAID controller (thus they are not usable without the controller) and there is still no access via smartctl.You cannot simply remove the controller, since it provides the hardware connector for attaching the front disk bays (besides the RAID controller there is only one on-board SATA connector).
Hp dl360 g6 configure smart array software#
![hp dl360 g6 configure smart array hp dl360 g6 configure smart array](https://i.stack.imgur.com/gQT8U.png)
you want software RAID instead (no dependency (lock-in) with regard to this specific RAID controller you may plug your disks into any ordinary other server).You may want to avoid using a hardware-based RAID controller for some reason:
Hp dl360 g6 configure smart array how to#
The description below explains how to disable the RAID modes of this controller and use the attached disks directly (e.g. HP Proliant servers usually contain a hardware-based RAID controller (e.g.